EHBSH240700A
€12.75
d: 0.7
R: 0.35R
L1: 1.4
L: 50
D: 4
F: 2
- Series Specifications
- Description
- Material Chart
- Additional information
- Cutting Conditions
Series Specifications
| Product No. | Corner Radius (R) | Diameter (d) | CL (L1) | OAL (L) |
Shank (D) |
Flutes (F) |
|---|---|---|---|---|---|---|
| EHBSH240200A | 0.10R | 0,2 | 0,4 | 50 | 4 | 2 |
| EHBSH240300A | 0.15R | 0,3 | 0,6 | 50 | 4 | 2 |
| EHBSH240400A | 0.20R | 0,4 | 0,8 | 50 | 4 | 2 |
| EHBSH240500A | 0.25R | 0,5 | 1 | 50 | 4 | 2 |
| EHBSH240600A | 0.30R | 0,6 | 1,2 | 50 | 4 | 2 |
| EHBSH240700A | 0.35R | 0,7 | 1,4 | 50 | 4 | 2 |
| EHBSH240800A | 0.40R | 0,8 | 1,6 | 50 | 4 | 2 |
| EHBSH240900A | 0.45R | 0,9 | 1,8 | 50 | 4 | 2 |
| EHBSH241000A | 0.50R | 1,0 | 2 | 50 | 4 | 2 |
| EHBSH241500A | 0.75R | 1,5 | 3 | 50 | 4 | 2 |
| EHBSH242000A | 1.00R | 2,0 | 4 | 50 | 4 | 2 |
| EHBSH233000A | 1.50R | 3,0 | 6 | 50 | 3 | 2 |
| EHBSH243000A | 1.50R | 3,0 | 6 | 50 | 4 | 2 |
| EHBSH244000A | 2.00R | 4,0 | 8 | 50 | 4 | 2 |
| EHBSH205000A | 2.50R | 5,0 | 10 | 50 | 6 | 2 |
| EHBSH206000A | 3.00R | 6,0 | 12 | 50 | 6 | 2 |
| EHBSH208000A | 4.00R | 8,0 | 16 | 60 | 8 | 2 |
| EHBSH210000A | 5.00R | 10,0 | 20 | 75 | 10 | 2 |
| EHBSH212000A | 6.00R | 12,0 | 24 | 75 | 12 | 2 |
| EHBSH216000A | 8.00R | 16,0 | 32 | 100 | 16 | 2 |
Description
Description
EHBSH240700A – Solid Carbide Endmill
Ball Nose ∙ 2F
Corner Radius (R): 0.35R
Diameter (d): 0.7
CL (L1): 1.4
OAL (L): 50
Shank (D): 4
Flutes (F): 2
Suitable for HRC 50 and over HRC 50 Hardened Steel, also maximum up to HRC 65.
Due to short cutting length provides an excellent face milling surface roughness of the work pieces.
New tool geometry increases wear resistance and cutting force is decreased.
Material Chart
| Material Group | Description | Content | Tensile Strength (MPa)* | Hardness (HB) | Hardness (HRC) | DIN Standards |
|---|---|---|---|---|---|---|
| P1 | Low-Carbon Steels | C < 0.25% | < 530 | < 125 | - | C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38 |
| P2 | Medium-Carbon Steels, High-Carbon Steels | C > 0.25% | < 530 | < 220 | < 25 | ST52, S355JR, C35, GS60, Cf53 |
| P3 | Alloy Steels, Tool Steels | C > 0.25% | 600 ~ 850 | < 330 | < 35 | 16MnCr5, Ck45, 21CrMoV5-7, 38SMn28 |
| P4 | Alloy Steels, Tool Steels | C > 0.25% | 800 ~ 1000 | 350 ~ 450 | 35 ~ 48 | 100Cr6, 105MnCr4, 51CrMnV4, 105WCr6, 100Cr2 |
| P5 | Ferritic, Martensitic, PH Stainless Steels | C = 0~0.4% | 600 ~ 850 | < 330 | < 35 | X6Cr13, X10Cr13, X20Cr13, X12CrMoS17, X20CrMo13 |
| P6 | Austenitic Stainless Steel | C = 0.1~0.6% | 900 ~ 1350 | 350 ~ 450 | 35 ~ 48 | X40CrMoV51, H1, X155CrVMo121, S6-5-2-5, X45Cr13, X120Mn12 |
| M1 | Austenitic Stainless Steel | C = 0.05~0.15% | < 650 | 130 ~ 200 | - | X5CrNi1810, GX6CrNiMo1810, X6CrNiMoTi17122, X8CrNiMoAl1572 |
| M2 | High-Strength Austenitic Stainless and Cast Stainless Steels | C = 0.05~0.15% | 500 ~ 700 | 150 ~ 230 | < 25 | X2CrNiMo134, X10CrNi189, X5CrNiCuNb1744 |
| M3 | Duplex Stainless Steel | C = 0.05~0.2% | < 900 | 135 ~ 275 | < 30 | X2CrNiMoN2315, X20CrNiSi254, GX40CrNiSi274, X2CrNiMoN2253 |
| K1 | Grey Cast Iron | - | 150 ~ 400 | 120 ~ 290 | < 32 | GG10, GG15, GG20, GG25, GG40 |
| K2 | Low- and Medium-Strength Ductile Irons and Compacted Graphite Irons (CGI) | - | 400 ~ 600 | 130 ~ 260 | < 28 | GGG35.3, GGG40.3, GGG70 |
| K3 | High-Strength Ductile Irons and Austempered Ductile Iron (ADI) | - | 600 ~ 900 | 180 ~ 350 | < 43 | GTW-35-04, GTW-65, GTS-35-10, GTS-45-06 |
| N1 | Wrought Aluminium | - | < 520 | 60 ~ 90 | < 43 | AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb |
| N2 | Low-Silicon Aluminium Alloys | Si < 12.2% | < 350 | 70 ~ 120 | < 43 | GAISiCu4, GDAISi10Mg |
| N3 | High-Silicon Aluminium Alloys | Si < 12.2% | 200 ~ 320 | 60 ~ 120 | < 43 | G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg |
| N4 | Copper and Copper Alloys | - | 200 ~ 650 | 60 ~ 200 | < 43 | CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn |
| N5 | Nylon, Plastics | - | - | - | < 43 | Lexan, Hostalen, Polystyrol, Makrolon |
| N6 | Carbon, Graphite Composites, CFRP | - | 600 ~ 1500 | - | < 43 | CFRP, CFK, GFK |
| S1 | Iron-Based, Heat-Resistant Alloys | - | 500 ~ 1200 | 160 ~ 260 | 25 ~ 48 | X1NiCrMoCu32287, X12NiCrSi3616, X5NiCrAITi3120,X40CoCrNi20 20 |
| S2 | Cobalt-Based, Heat-Resistant Alloys | - | 1000 ~ 1450 | 250 ~ 450 | 25 ~ 48 | Haynes 188, Stellite 6, 21, 31 |
| S3 | Nickel-Based, Heat-Resistant Alloys | - | 600 ~ 1700 | 160 ~ 450 | 33 ~ 48 | NiCr29Fe, NiCr22Mo9Nb, NiCr20Mo, NiCr19FeNbMo, NiCr16Fe7TiAl |
| S4 | Titanium and Titanium Alloys | - | - | 300 ~ 400 | 33 ~ 48 | Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2 |
| H1 | Hardened Materials | - | - | < 460 | < 48 | GX260NiCr42, GX330NiCr42, GX300CrNiSi952, GX300CrMo153 |
| H2 | Hardened Materials | - | - | 460 ~ 560 | 48 ~ 55 | - |
| H3 | Hardened Materials | - | - | 560 ~ 650 | 56 ~ 60 | - |
| H4 | Hardened Materials | - | - | > 650 | > 60 | - |
Additional information
Cutting Conditions
