EMSRV412000S - Image 1
EMSRV412000S - Image 2
EMSRV412000S - Image 3

EMSRV412000S

€63.40

d: 12
L1: 30
L: 75
D: 12
Chamfer: 0.50C
F: 4

SKU: EMSRV412000S
EMSRV
Product No. Diameter
(d)		 CL
(L1)		 OAL
(L)		 Shank
(D)		 Chamfer Flutes
(F)
EMSRV406000S 6 15 50 6 0.25C 4
EMSRV408000S 8 20 60 8 0.30C 4
EMSRV410000S 10 25 75 10 0.40C 4
EMSRV412000S 12 30 75 12 0.50C 4
EMSRV416000S 16 35 100 16 0.60C 4

Description

EMSRV412000S – Solid Carbide Endmill
Variable Spacing ∙ Roughing & Finishing ∙ Square ∙ 4F

Diameter (d): 12
CL (L1): 30
OAL (L): 75
Shank (D): 12
Chamfer: 0.50C
Flutes (F): 4

Unequal flute spacing for reducing vibrations at high load applications.
High removal rate for steel and alloy steel side roughing.
Provides finish surface at rough machining parameters.
SICO coating includes Al, Ti, Si, N elements.

Material Group Description Content Tensile Strength (MPa)* Hardness (HB) Hardness (HRC) DIN Standards
P1 Low-Carbon Steels C < 0.25% < 530 < 125 - C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38
P2 Medium-Carbon Steels, High-Carbon Steels C > 0.25% < 530 < 220 < 25 ST52, S355JR, C35, GS60, Cf53
P3 Alloy Steels, Tool Steels C > 0.25% 600 ~ 850 < 330 < 35 16MnCr5, Ck45, 21CrMoV5-7, 38SMn28
P4 Alloy Steels, Tool Steels C > 0.25% 800 ~ 1000 350 ~ 450 35 ~ 48 100Cr6, 105MnCr4, 51CrMnV4, 105WCr6, 100Cr2
P5 Ferritic, Martensitic, PH Stainless Steels C = 0~0.4% 600 ~ 850 < 330 < 35 X6Cr13, X10Cr13, X20Cr13, X12CrMoS17, X20CrMo13
P6 Austenitic Stainless Steel C = 0.1~0.6% 900 ~ 1350 350 ~ 450 35 ~ 48 X40CrMoV51, H1, X155CrVMo121, S6-5-2-5, X45Cr13, X120Mn12
M1 Austenitic Stainless Steel C = 0.05~0.15% < 650 130 ~ 200 - X5CrNi1810, GX6CrNiMo1810, X6CrNiMoTi17122, X8CrNiMoAl1572
M2 High-Strength Austenitic Stainless and Cast Stainless Steels C = 0.05~0.15% 500 ~ 700 150 ~ 230 < 25 X2CrNiMo134, X10CrNi189, X5CrNiCuNb1744
M3 Duplex Stainless Steel C = 0.05~0.2% < 900 135 ~ 275 < 30 X2CrNiMoN2315, X20CrNiSi254, GX40CrNiSi274, X2CrNiMoN2253
K1 Grey Cast Iron - 150 ~ 400 120 ~ 290 < 32 GG10, GG15, GG20, GG25, GG40
K2 Low- and Medium-Strength Ductile Irons and Compacted Graphite Irons (CGI) - 400 ~ 600 130 ~ 260 < 28 GGG35.3, GGG40.3, GGG70
K3 High-Strength Ductile Irons and Austempered Ductile Iron (ADI) - 600 ~ 900 180 ~ 350 < 43 GTW-35-04, GTW-65, GTS-35-10, GTS-45-06
N1 Wrought Aluminium - < 520 60 ~ 90 < 43 AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb
N2 Low-Silicon Aluminium Alloys Si < 12.2% < 350 70 ~ 120 < 43 GAISiCu4, GDAISi10Mg
N3 High-Silicon Aluminium Alloys Si < 12.2% 200 ~ 320 60 ~ 120 < 43 G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg
N4 Copper and Copper Alloys - 200 ~ 650 60 ~ 200 < 43 CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn
N5 Nylon, Plastics - - - < 43 Lexan, Hostalen, Polystyrol, Makrolon
N6 Carbon, Graphite Composites, CFRP - 600 ~ 1500 - < 43 CFRP, CFK, GFK
S1 Iron-Based, Heat-Resistant Alloys - 500 ~ 1200 160 ~ 260 25 ~ 48 X1NiCrMoCu32287, X12NiCrSi3616, X5NiCrAITi3120,X40CoCrNi20 20
S2 Cobalt-Based, Heat-Resistant Alloys - 1000 ~ 1450 250 ~ 450 25 ~ 48 Haynes 188, Stellite 6, 21, 31
S3 Nickel-Based, Heat-Resistant Alloys - 600 ~ 1700 160 ~ 450 33 ~ 48 NiCr29Fe, NiCr22Mo9Nb, NiCr20Mo, NiCr19FeNbMo, NiCr16Fe7TiAl
S4 Titanium and Titanium Alloys - - 300 ~ 400 33 ~ 48 Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2
H1 Hardened Materials - - < 460 < 48 GX260NiCr42, GX330NiCr42, GX300CrNiSi952, GX300CrMo153
H2 Hardened Materials - - 460 ~ 560 48 ~ 55 -
H3 Hardened Materials - - 560 ~ 650 56 ~ 60 -
H4 Hardened Materials - - > 650 > 60 -

Additional information

Material

, ,

Diameter

CL

OAL

Shank

Flutes

45° Chamfer

EMSSV5f