ENCRC24400520L
€31.50
d: 4
R: 0.5R
L1: 8
L2: 20
L: 50
D: 4
F: 2
- Series Specifications
- Description
- Material Chart
- Additional information
- Cutting Conditions
Series Specifications
| Product No. | Diameter (d) |
Corner Radius (R) |
CL (L1) |
EFF-L (L2) |
OAL (L) |
Shank (D) |
Flutes (F) |
|---|---|---|---|---|---|---|---|
| ENCRC24050102L | 0.5 | 0.1R | 1 | 2 | 50 | 4 | 2 |
| ENCRC24050103L | 0.5 | 0.1R | 1 | 3 | 50 | 4 | 2 |
| ENCRC24050104L | 0.5 | 0.1R | 1 | 4 | 50 | 4 | 2 |
| ENCRC24050105L | 0.5 | 0.1R | 1 | 5 | 50 | 4 | 2 |
| ENCRC24100103L | 1 | 0.1R | 2 | 3 | 50 | 4 | 2 |
| ENCRC24100104L | 1 | 0.1R | 2 | 4 | 50 | 4 | 2 |
| ENCRC24100105L | 1 | 0.1R | 2 | 5 | 50 | 4 | 2 |
| ENCRC24100106L | 1 | 0.1R | 2 | 6 | 50 | 4 | 2 |
| ENCRC24100108L | 1 | 0.1R | 2 | 8 | 50 | 4 | 2 |
| ENCRC24100110L | 1 | 0.1R | 2 | 10 | 50 | 4 | 2 |
| ENCRC24100203L | 1 | 0.2R | 2 | 3 | 50 | 4 | 2 |
| ENCRC24100204L | 1 | 0.2R | 2 | 4 | 50 | 4 | 2 |
| ENCRC24100205L | 1 | 0.2R | 2 | 5 | 50 | 4 | 2 |
| ENCRC24100206L | 1 | 0.2R | 2 | 6 | 50 | 4 | 2 |
| ENCRC24100208L | 1 | 0.2R | 2 | 8 | 50 | 4 | 2 |
| ENCRC24100210L | 1 | 0.2R | 2 | 10 | 50 | 4 | 2 |
| ENCRC24200105L | 2 | 0.1R | 4 | 5 | 50 | 4 | 2 |
| ENCRC24200108L | 2 | 0.1R | 4 | 8 | 50 | 4 | 2 |
| ENCRC24200110L | 2 | 0.1R | 4 | 10 | 50 | 4 | 2 |
| ENCRC24200115L | 2 | 0.1R | 4 | 15 | 50 | 4 | 2 |
| ENCRC24200120L | 2 | 0.1R | 4 | 20 | 50 | 4 | 2 |
| ENCRC24200305L | 2 | 0.3R | 4 | 5 | 50 | 4 | 2 |
| ENCRC24200308L | 2 | 0.3R | 4 | 8 | 50 | 4 | 2 |
| ENCRC24200310L | 2 | 0.3R | 4 | 10 | 50 | 4 | 2 |
| ENCRC24200315L | 2 | 0.3R | 4 | 15 | 50 | 4 | 2 |
| ENCRC24200320L | 2 | 0.3R | 4 | 20 | 50 | 4 | 2 |
| ENCRC24300212L | 3 | 0.2R | 6 | 12 | 50 | 4 | 2 |
| ENCRC24300215L | 3 | 0.2R | 6 | 15 | 50 | 4 | 2 |
| ENCRC24300220L | 3 | 0.2R | 6 | 20 | 50 | 4 | 2 |
| ENCRC24300512L | 3 | 0.5R | 6 | 12 | 50 | 4 | 2 |
| ENCRC24300515L | 3 | 0.5R | 6 | 15 | 50 | 4 | 2 |
| ENCRC24300520L | 3 | 0.5R | 6 | 20 | 50 | 4 | 2 |
| ENCRC24400216L | 4 | 0.2R | 8 | 16 | 50 | 4 | 2 |
| ENCRC24400220L | 4 | 0.2R | 8 | 20 | 50 | 4 | 2 |
| ENCRC24400516L | 4 | 0.5R | 8 | 16 | 50 | 4 | 2 |
| ENCRC24400520L | 4 | 0.5R | 8 | 20 | 50 | 4 | 2 |
Description
Description
ENCRC24400520L – Solid Carbide Endmill
Long Neck ∙ Corner Radius ∙ 2F (for CU & AL)
Diameter (d): 4
Corner Radius (R): 0.5R
CL (L1): 8
EFF-L (L2): 20
OAL (L): 50
Shank (D): 4
Flutes (F): 2
Suitable for copper alloy, copper electrodes, aluminum processing special.
Sharp cutting edge and flute polished.
It provides an excellent surface due to better surface grindings.
Long neck design is suitable for rid cutting.
NDLC – Nano DLC coating provides exceptional wear resistance and good tool life.
Material Chart
| Material Group | Description | Content | Tensile Strength (MPa)* | Hardness (HB) | Hardness (HRC) | DIN Standards |
|---|---|---|---|---|---|---|
| P1 | Low-Carbon Steels | C < 0.25% | < 530 | < 125 | - | C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38 |
| P2 | Medium-Carbon Steels, High-Carbon Steels | C > 0.25% | < 530 | < 220 | < 25 | ST52, S355JR, C35, GS60, Cf53 |
| P3 | Alloy Steels, Tool Steels | C > 0.25% | 600 ~ 850 | < 330 | < 35 | 16MnCr5, Ck45, 21CrMoV5-7, 38SMn28 |
| P4 | Alloy Steels, Tool Steels | C > 0.25% | 800 ~ 1000 | 350 ~ 450 | 35 ~ 48 | 100Cr6, 105MnCr4, 51CrMnV4, 105WCr6, 100Cr2 |
| P5 | Ferritic, Martensitic, PH Stainless Steels | C = 0~0.4% | 600 ~ 850 | < 330 | < 35 | X6Cr13, X10Cr13, X20Cr13, X12CrMoS17, X20CrMo13 |
| P6 | Austenitic Stainless Steel | C = 0.1~0.6% | 900 ~ 1350 | 350 ~ 450 | 35 ~ 48 | X40CrMoV51, H1, X155CrVMo121, S6-5-2-5, X45Cr13, X120Mn12 |
| M1 | Austenitic Stainless Steel | C = 0.05~0.15% | < 650 | 130 ~ 200 | - | X5CrNi1810, GX6CrNiMo1810, X6CrNiMoTi17122, X8CrNiMoAl1572 |
| M2 | High-Strength Austenitic Stainless and Cast Stainless Steels | C = 0.05~0.15% | 500 ~ 700 | 150 ~ 230 | < 25 | X2CrNiMo134, X10CrNi189, X5CrNiCuNb1744 |
| M3 | Duplex Stainless Steel | C = 0.05~0.2% | < 900 | 135 ~ 275 | < 30 | X2CrNiMoN2315, X20CrNiSi254, GX40CrNiSi274, X2CrNiMoN2253 |
| K1 | Grey Cast Iron | - | 150 ~ 400 | 120 ~ 290 | < 32 | GG10, GG15, GG20, GG25, GG40 |
| K2 | Low- and Medium-Strength Ductile Irons and Compacted Graphite Irons (CGI) | - | 400 ~ 600 | 130 ~ 260 | < 28 | GGG35.3, GGG40.3, GGG70 |
| K3 | High-Strength Ductile Irons and Austempered Ductile Iron (ADI) | - | 600 ~ 900 | 180 ~ 350 | < 43 | GTW-35-04, GTW-65, GTS-35-10, GTS-45-06 |
| N1 | Wrought Aluminium | - | < 520 | 60 ~ 90 | < 43 | AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb |
| N2 | Low-Silicon Aluminium Alloys | Si < 12.2% | < 350 | 70 ~ 120 | < 43 | GAISiCu4, GDAISi10Mg |
| N3 | High-Silicon Aluminium Alloys | Si < 12.2% | 200 ~ 320 | 60 ~ 120 | < 43 | G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg |
| N4 | Copper and Copper Alloys | - | 200 ~ 650 | 60 ~ 200 | < 43 | CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn |
| N5 | Nylon, Plastics | - | - | - | < 43 | Lexan, Hostalen, Polystyrol, Makrolon |
| N6 | Carbon, Graphite Composites, CFRP | - | 600 ~ 1500 | - | < 43 | CFRP, CFK, GFK |
| S1 | Iron-Based, Heat-Resistant Alloys | - | 500 ~ 1200 | 160 ~ 260 | 25 ~ 48 | X1NiCrMoCu32287, X12NiCrSi3616, X5NiCrAITi3120,X40CoCrNi20 20 |
| S2 | Cobalt-Based, Heat-Resistant Alloys | - | 1000 ~ 1450 | 250 ~ 450 | 25 ~ 48 | Haynes 188, Stellite 6, 21, 31 |
| S3 | Nickel-Based, Heat-Resistant Alloys | - | 600 ~ 1700 | 160 ~ 450 | 33 ~ 48 | NiCr29Fe, NiCr22Mo9Nb, NiCr20Mo, NiCr19FeNbMo, NiCr16Fe7TiAl |
| S4 | Titanium and Titanium Alloys | - | - | 300 ~ 400 | 33 ~ 48 | Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2 |
| H1 | Hardened Materials | - | - | < 460 | < 48 | GX260NiCr42, GX330NiCr42, GX300CrNiSi952, GX300CrMo153 |
| H2 | Hardened Materials | - | - | 460 ~ 560 | 48 ~ 55 | - |
| H3 | Hardened Materials | - | - | 560 ~ 650 | 56 ~ 60 | - |
| H4 | Hardened Materials | - | - | > 650 | > 60 | - |
Additional information
Cutting Conditions
