0 ITEMSView cart
ENSSP106000
€10.70
d: 6
L1: 15
L: 50
D: 6
F: 1
- Series Specifications
- Description
- Material Chart
- Additional information
- Cutting Conditions
Series Specifications
| Product No. | Diameter (d) |
CL (L1) |
OAL (L) |
Shank (D) |
Flutes (F) |
|---|---|---|---|---|---|
| ENSSP104000 | 4 | 12 | 50 | 6 | 1 |
| ENSSP106000 | 6 | 15 | 50 | 6 | 1 |
| ENSSP108000 | 8 | 20 | 60 | 8 | 1 |
| ENSSP110000 | 10 | 30 | 75 | 10 | 1 |
| ENSSP112000 | 12 | 30 | 75 | 12 | 1 |
Description
Description
ENSSP106000 – Solid Carbide Endmill
High Helix ∙ Square ∙ 1F
Diameter (d): 6
CL (L1): 15
OAL (L): 50
Shank (D): 6
Flutes (F): 1
45° helix design for side milling.
Single flute endmill has large chip evacuation.
Sharp and polishing cutting edge produces an excellent surface finish.
Suitable for aluminum, copper and plastic material.
Material Chart
| Material Group | Description | Content | Tensile Strength (MPa)* | Hardness (HB) | Hardness (HRC) | DIN Standards |
|---|---|---|---|---|---|---|
| P1 | Low-Carbon Steels | C < 0.25% | < 530 | < 125 | - | C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38 |
| P2 | Medium-Carbon Steels, High-Carbon Steels | C > 0.25% | < 530 | < 220 | < 25 | ST52, S355JR, C35, GS60, Cf53 |
| P3 | Alloy Steels, Tool Steels | C > 0.25% | 600 ~ 850 | < 330 | < 35 | 16MnCr5, Ck45, 21CrMoV5-7, 38SMn28 |
| P4 | Alloy Steels, Tool Steels | C > 0.25% | 800 ~ 1000 | 350 ~ 450 | 35 ~ 48 | 100Cr6, 105MnCr4, 51CrMnV4, 105WCr6, 100Cr2 |
| P5 | Ferritic, Martensitic, PH Stainless Steels | C = 0~0.4% | 600 ~ 850 | < 330 | < 35 | X6Cr13, X10Cr13, X20Cr13, X12CrMoS17, X20CrMo13 |
| P6 | Austenitic Stainless Steel | C = 0.1~0.6% | 900 ~ 1350 | 350 ~ 450 | 35 ~ 48 | X40CrMoV51, H1, X155CrVMo121, S6-5-2-5, X45Cr13, X120Mn12 |
| M1 | Austenitic Stainless Steel | C = 0.05~0.15% | < 650 | 130 ~ 200 | - | X5CrNi1810, GX6CrNiMo1810, X6CrNiMoTi17122, X8CrNiMoAl1572 |
| M2 | High-Strength Austenitic Stainless and Cast Stainless Steels | C = 0.05~0.15% | 500 ~ 700 | 150 ~ 230 | < 25 | X2CrNiMo134, X10CrNi189, X5CrNiCuNb1744 |
| M3 | Duplex Stainless Steel | C = 0.05~0.2% | < 900 | 135 ~ 275 | < 30 | X2CrNiMoN2315, X20CrNiSi254, GX40CrNiSi274, X2CrNiMoN2253 |
| K1 | Grey Cast Iron | - | 150 ~ 400 | 120 ~ 290 | < 32 | GG10, GG15, GG20, GG25, GG40 |
| K2 | Low- and Medium-Strength Ductile Irons and Compacted Graphite Irons (CGI) | - | 400 ~ 600 | 130 ~ 260 | < 28 | GGG35.3, GGG40.3, GGG70 |
| K3 | High-Strength Ductile Irons and Austempered Ductile Iron (ADI) | - | 600 ~ 900 | 180 ~ 350 | < 43 | GTW-35-04, GTW-65, GTS-35-10, GTS-45-06 |
| N1 | Wrought Aluminium | - | < 520 | 60 ~ 90 | < 43 | AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb |
| N2 | Low-Silicon Aluminium Alloys | Si < 12.2% | < 350 | 70 ~ 120 | < 43 | GAISiCu4, GDAISi10Mg |
| N3 | High-Silicon Aluminium Alloys | Si < 12.2% | 200 ~ 320 | 60 ~ 120 | < 43 | G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg |
| N4 | Copper and Copper Alloys | - | 200 ~ 650 | 60 ~ 200 | < 43 | CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn |
| N5 | Nylon, Plastics | - | - | - | < 43 | Lexan, Hostalen, Polystyrol, Makrolon |
| N6 | Carbon, Graphite Composites, CFRP | - | 600 ~ 1500 | - | < 43 | CFRP, CFK, GFK |
| S1 | Iron-Based, Heat-Resistant Alloys | - | 500 ~ 1200 | 160 ~ 260 | 25 ~ 48 | X1NiCrMoCu32287, X12NiCrSi3616, X5NiCrAITi3120,X40CoCrNi20 20 |
| S2 | Cobalt-Based, Heat-Resistant Alloys | - | 1000 ~ 1450 | 250 ~ 450 | 25 ~ 48 | Haynes 188, Stellite 6, 21, 31 |
| S3 | Nickel-Based, Heat-Resistant Alloys | - | 600 ~ 1700 | 160 ~ 450 | 33 ~ 48 | NiCr29Fe, NiCr22Mo9Nb, NiCr20Mo, NiCr19FeNbMo, NiCr16Fe7TiAl |
| S4 | Titanium and Titanium Alloys | - | - | 300 ~ 400 | 33 ~ 48 | Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2 |
| H1 | Hardened Materials | - | - | < 460 | < 48 | GX260NiCr42, GX330NiCr42, GX300CrNiSi952, GX300CrMo153 |
| H2 | Hardened Materials | - | - | 460 ~ 560 | 48 ~ 55 | - |
| H3 | Hardened Materials | - | - | 560 ~ 650 | 56 ~ 60 | - |
| H4 | Hardened Materials | - | - | > 650 | > 60 | - |
Additional information
Cutting Conditions
