EPISA403910U
€32.64
R: 1R
d:3.9
L: 50
D: 6
F: 4
- Series Specifications
- Description
- Material Chart
- Additional information
- Cutting Conditions
Series Specifications
Product No. | Corner Radius (R) |
Diameter (d) |
OAL (L) |
Shank (D) |
Flutes (F) |
---|---|---|---|---|---|
EPISA242905U | 0.5R | 2,9 | 50 | 4 | 2 |
EPISA204905U | 0.5R | 4,9 | 50 | 6 | 2 |
EPISA241910U | 1.0R | 1,9 | 50 | 4 | 2 |
EPISA203910U | 1.0R | 3,9 | 50 | 6 | 2 |
EPISA205910U | 1.0R | 5,9 | 60 | 8 | 2 |
EPISA204915U | 1.5R | 4,9 | 60 | 8 | 2 |
EPISA205920U | 2.0R | 5,9 | 75 | 10 | 2 |
EPISA204925U | 2.5R | 4,9 | 75 | 10 | 2 |
EPISA205930U | 3.0R | 5,9 | 75 | 12 | 2 |
EPISA203940U | 4.0R | 3,9 | 75 | 12 | 2 |
EPISA205950U | 5.0R | 5,9 | 75 | 16 | 2 |
EPISA203960U | 6.0R | 3,9 | 75 | 16 | 2 |
EPISA442905U | 0.5R | 2,9 | 50 | 4 | 4 |
EPISA404905U | 0.5R | 4,9 | 50 | 6 | 4 |
EPISA441910U | 1.0R | 1,9 | 50 | 4 | 4 |
EPISA403910U | 1.0R | 3,9 | 50 | 6 | 4 |
EPISA405910U | 1.0R | 5,9 | 60 | 8 | 4 |
EPISA404915U | 1.5R | 4,9 | 60 | 8 | 4 |
EPISA405920U | 2.0R | 5,9 | 75 | 10 | 4 |
EPISA404925U | 2.5R | 4,9 | 75 | 10 | 4 |
EPISA405930U | 3.0R | 5,9 | 75 | 12 | 4 |
EPISA403940U | 4.0R | 3,9 | 75 | 12 | 4 |
EPISA405950U | 5.0R | 5,9 | 75 | 16 | 4 |
EPISA403960U | 6.0R | 3,9 | 75 | 16 | 4 |
Description
Description
EPISA403910U – Solid Carbide Endmill
Inner Radius ∙ 2F / 4F
Corner Radius (R): 1R
Diameter (d): 3.9
OAL (L): 50
Shank (D): 6
Flutes (F): 4
Suitable for HRC 30 to HRC 55 Ordinary Steel, Alloy Steel, Cast Iron, Heat-Resistant Steel, etc.
Inner radius tools are suitable for chamfering with round corner application.
Material Chart
Material Group | Description | Content | Tensile Strength (MPa)* | Hardness (HB) | Hardness (HRC) | DIN Standards |
---|---|---|---|---|---|---|
P1 | Low-Carbon Steels | C < 0.25% | < 530 | < 125 | - | C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38 |
P2 | Medium-Carbon Steels, High-Carbon Steels | C > 0.25% | < 530 | < 220 | < 25 | ST52, S355JR, C35, GS60, Cf53 |
P3 | Alloy Steels, Tool Steels | C > 0.25% | 600 ~ 850 | < 330 | < 35 | 16MnCr5, Ck45, 21CrMoV5-7, 38SMn28 |
P4 | Alloy Steels, Tool Steels | C > 0.25% | 800 ~ 1000 | 350 ~ 450 | 35 ~ 48 | 100Cr6, 105MnCr4, 51CrMnV4, 105WCr6, 100Cr2 |
P5 | Ferritic, Martensitic, PH Stainless Steels | C = 0~0.4% | 600 ~ 850 | < 330 | < 35 | X6Cr13, X10Cr13, X20Cr13, X12CrMoS17, X20CrMo13 |
P6 | Austenitic Stainless Steel | C = 0.1~0.6% | 900 ~ 1350 | 350 ~ 450 | 35 ~ 48 | X40CrMoV51, H1, X155CrVMo121, S6-5-2-5, X45Cr13, X120Mn12 |
M1 | Austenitic Stainless Steel | C = 0.05~0.15% | < 650 | 130 ~ 200 | - | X5CrNi1810, GX6CrNiMo1810, X6CrNiMoTi17122, X8CrNiMoAl1572 |
M2 | High-Strength Austenitic Stainless and Cast Stainless Steels | C = 0.05~0.15% | 500 ~ 700 | 150 ~ 230 | < 25 | X2CrNiMo134, X10CrNi189, X5CrNiCuNb1744 |
M3 | Duplex Stainless Steel | C = 0.05~0.2% | < 900 | 135 ~ 275 | < 30 | X2CrNiMoN2315, X20CrNiSi254, GX40CrNiSi274, X2CrNiMoN2253 |
K1 | Grey Cast Iron | - | 150 ~ 400 | 120 ~ 290 | < 32 | GG10, GG15, GG20, GG25, GG40 |
K2 | Low- and Medium-Strength Ductile Irons and Compacted Graphite Irons (CGI) | - | 400 ~ 600 | 130 ~ 260 | < 28 | GGG35.3, GGG40.3, GGG70 |
K3 | High-Strength Ductile Irons and Austempered Ductile Iron (ADI) | - | 600 ~ 900 | 180 ~ 350 | < 43 | GTW-35-04, GTW-65, GTS-35-10, GTS-45-06 |
N1 | Wrought Aluminium | - | < 520 | 60 ~ 90 | < 43 | AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb |
N2 | Low-Silicon Aluminium Alloys | Si < 12.2% | < 350 | 70 ~ 120 | < 43 | GAISiCu4, GDAISi10Mg |
N3 | High-Silicon Aluminium Alloys | Si < 12.2% | 200 ~ 320 | 60 ~ 120 | < 43 | G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg |
N4 | Copper and Copper Alloys | - | 200 ~ 650 | 60 ~ 200 | < 43 | CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn |
N5 | Nylon, Plastics | - | - | - | < 43 | Lexan, Hostalen, Polystyrol, Makrolon |
N6 | Carbon, Graphite Composites, CFRP | - | 600 ~ 1500 | - | < 43 | CFRP, CFK, GFK |
S1 | Iron-Based, Heat-Resistant Alloys | - | 500 ~ 1200 | 160 ~ 260 | 25 ~ 48 | X1NiCrMoCu32287, X12NiCrSi3616, X5NiCrAITi3120,X40CoCrNi20 20 |
S2 | Cobalt-Based, Heat-Resistant Alloys | - | 1000 ~ 1450 | 250 ~ 450 | 25 ~ 48 | Haynes 188, Stellite 6, 21, 31 |
S3 | Nickel-Based, Heat-Resistant Alloys | - | 600 ~ 1700 | 160 ~ 450 | 33 ~ 48 | NiCr29Fe, NiCr22Mo9Nb, NiCr20Mo, NiCr19FeNbMo, NiCr16Fe7TiAl |
S4 | Titanium and Titanium Alloys | - | - | 300 ~ 400 | 33 ~ 48 | Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2 |
H1 | Hardened Materials | - | - | < 460 | < 48 | GX260NiCr42, GX330NiCr42, GX300CrNiSi952, GX300CrMo153 |
H2 | Hardened Materials | - | - | 460 ~ 560 | 48 ~ 55 | - |
H3 | Hardened Materials | - | - | 560 ~ 650 | 56 ~ 60 | - |
H4 | Hardened Materials | - | - | > 650 | > 60 | - |